86Duino
86Duino offers x86-based Arduino-compatible boards, 3D printers, and related materials. This category includes 86Duino One, 86Duino Zero, and 3D printer filament designed for both makers and industrial applications.
-
86Duino ONE
86Duino Board US$ 106.00- Vortex86EX Processor
- 300MHz 32-bit x86
- 128MB/1GB DDR3
- LAN/USB2.0/Micro-SD/I2C/UART/RS485/CAN
- Open-Source Hardware
- Support DOS, Windows, Linux
- Arduino-Compatible
-
ENJOY 1Kg Classic Filament
86Duino Filament Please select the color you prefer86Duino ENJOY Filament_印匠の系.
- Material：PLA
- Diameter：1.75mm
- Net Weight：1.0kg
- Gross Weight：1.35kg
- Spool：200mm (D) x 82mm (W) x 52mm (Hole)
- Nozzle Temp.：195℃～210℃
-
SOM-128-EX
86Duino Board US$ 60.00- Vortex86EX- 400MHz
- Onboard 128MB/1GB DDR
- Onboard 8MB SPI Flash Disk
- Ethernet MAC + PHY
- SATA Interface
- PCI-E Control Interface
- PCI-E Target Interface
- ADC Channel x 8
- USB 2.0 Port
- DMA Controller
-
VDX3-ETX-I-DEV
86Duino US$ 250.00- ICOP VDX3-ETX Carrier Board for VDX3-ETX Module.
- 2S / 4U / VGA / LVDS / LAN / LPT / I2C / AUDIO / PCI / ISA / 16GPIO / IDE / SATA
- Without: Secondary IDE Channel
- Optional: GLAN
- Notice: The order in this product page does not include the CPU module.
- Optional:ETX Module、Flash Storage
-
ENJOY 1kg Exclusive Filament
86Duino Filament Please select the color you prefer86Duino ENJOY Filament_印匠の系.
- Material：PLA
- Diameter：1.75mm
- Net Weight：1.0kg
- Gross Weight：1.35kg
- Spool：200mm (D) x 82mm (W) x 52mm (Hole)
- Nozzle Temp.：195℃～210℃
-
86Duino Zero
86Duino Board US$ 70.00- Vortex86EX Processor
- 300MHz 32-bit x86
- 128MB/1GB DDR3
- LAN/USB2.0/Micro-SD/I2C/UART/SPI
- Open-Source Hardware
- Support DOS, Windows, Linux
- Arduino “Leonardo” form factor
-
86SERVO T600
Servo Motor US$ 800.0086SERVO T600 is an electric motor that can precisely control angle, speed, and position based on control signals.
- DMP Vortex86EX2 533MHz+300MHz 32-bit x86
- Position Sensor: Absolute optical encoder 22bits PPR
- Communication: RS485 x 2 ports, 6Mbps
- Gear Box Backlash: <2 arcmin (0.033°)
- Command Protocol: EtherCAT / Modbus RTU (optional)
- Dimension: 76(W) x 76(H) x 112(L)mm
- Rotational Range: 0°~ 360°, endless turn
-
86SERVO T120
Servo Motor US$ 600.0086SERVO T120 is a high-performance intelligent servo motor composed of a controller, sensor, gearbox, servo motor, and controller.
- DMP Vortex86EX2 533MHz+300MHz 32-bit x86
- Position Sensor: Contactless absolute encoder (16,384PPR) Optical encoder (904,396PPR)
- Communication: RS485 x 2 ports, 6Mbps
- Gear Box Backlash: <2 arcmin (0.033°)
- Command Protocol: Modbus RTU / EtherCAT(optional)
- Dimension: 44(W) x 44(H) x 60(L)mm
- Rotational Range: 0°~ 360°, endless turn
-
86Duino EduCake
86Duino Board US$ 115.00- Processor: Vortex86EX
- Clock Speed: 300 MHz
- Memory: 128MB DDR3
- Flash Memory: 8MB
- Digital I/O Pins: 45 (of which 11 provide 32bit PWM output)
- Analog Input Pins: 7 (11bit)
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- DC Current per I/O Pin: 16 mA
- DC Current for 3.3V Pin: 400 mA
-
86STEP-577609
Stepper Motor US$ 80.00- Stall Detection, Position Verification, Accurate Homing, and Close-loop control with step motor benefit
- Holding torque: 1800mN.m
- Step angle: 0.9°
- Detent torque: 70mN.m
- Rated Current: 3.0A
- Weight: 1.0kg
-
86STEP-426009
Stepper Motor US$ 62.00- Stall Detection, Position Verification, Accurate Homing, and Close-loop control with step motor benefit
- Holding torque: 860mN.m
- Step angle: 0.9°
- Detent torque: 20mN.m
- Rated Current: 1.50A
- Weight: 0.45kg
-
86STEP-423409
Stepper Motor US$ 50.00- Stall Detection, Position Verification, Accurate Homing, and Close-loop control with step motor benefit
- Holding torque: 280mN.m
- Step angle: 0.9°
- Detent torque: 12mN.m
- Rated Current: 0.75A
- Weight: 0.2kg
English 
繁體中文 
日本語 
Español