• PC / 104 24-bit ditital I / O card
  • Emulate 8255 PPI mode 0, transfer rate :300 KB / s (typical)
  • Digital output: Logic 0: 0.5V max.@ 24mA, Logic 1:2.0V min.@ 15mA
  • Digital input: Logic 0: 0.8V max.,Logic 1:2.0V min.

Availability: In stock

SKU: ICOP-0102 Category:

The ICOP-0102 is a 24-bit digital I/O module. Its 24 bits are arranged in two 24-bit digital I/O groups. Each group emulates an 8255 PPI (programmable peripheral interface) mode 0 but has a higher driving capacity than the 8255 PPI. Each 24-bit group is divided into three 8-bit ports. A port can be configured to function as input or output.

  • 24-bit digital I/O lines (1 group)
  • Group emulates 8225 PPI mode 0
  • Buffered circuits for higher driving capacity than 8255
  • Interrupt trigger on rising/falling edge
  • Output status readback
  • Pin compatible with OPT 0-22 I/O module racks
  • Transfer rate: 300 KB/sec. (typical)
  • Digital output:
    • Logic level 0: 0.5V max. @24mA sink
    • Logic level 1:2.0Vmin. @ 15mA
  • Digital input:
    • Logic level 0: 0.8V max.
    • Logic level 1:2.0Vmm
Weight 300 g
Dimensions 320 × 200 × 60 mm
Peripheral Function

I/O, PC/104


ICOP Technology


Bus PC/104 standard compliant
Connectors 2.54mm 50-pin box header for I/O port x1
Power Requirement Single Voltage +5@400mA
Weight 76g
Board Size 90 x 96mm (3.54 x 3.77 inches)
Operating Temperature 0°C ~ +55°C


Distributor: https://www.icop.com.tw/distributors

Direct Hyperlink



ICOP-0102-User Manual

Shopping Cart
ICOP-0102 fICOP-0102

Availability: In stock

Scroll to Top