Others » Página 2

Others

  • 86Duino Zero01

    86Duino Zero

     86Duino Board US$ 70.00
    • Vortex86EX Processor
    • 300MHz 32-bit x86
    • 128MB/1GB DDR3
    • LAN/USB2.0/Micro-SD/I2C/UART/SPI
    • Open-Source Hardware
    • Support DOS, Windows, Linux
    • Arduino “Leonardo” form factor
  • ICOP-0096

    ICOP-0096

     Peripheral US$ 24.00
    • Support ICOP’s VDX & VSX SBC series only
    • 18-bit TTL to LVDS converter
    • SN75LVDS84 FLATLINK transmitter
    • LCD BIOS available for resolution 640×480 upto 1024×768
  • CF-1916

    CF-1916

     Peripheral US$ 33.00
    • IDE (44pin) to Compact Flash Type I / II
    • Power / Acitve LED
    • PC / 104 Mounting holes
  • ICOP-0071

    ICOP-0071

     Peripheral US$ 45.00
    • PC / 104 DC to DC card
    • Input : +8V to +48 VDC
    • Output : 5V @ 2A
    • Overload / Overheat Protection
  • ICOP-0101-V2

    ICOP-0101-V2

     Peripheral US$ 124.00
    • PC / 104 48-bit ditital I / O card
    • Emulate 8255 PPI mode 0, transfer rate :300 KB / s (typical)
    • Digital output: Logic 0: 0.5V max.@ 24mA, Logic 1:2.0V min.@ 15mA
    • Digital input: Logic 0: 0.8V max.,Logic 1:2.0V min.
  • 86SERVO_T600 - 3

    86SERVO T600

     Servo Motor US$ 800.00

    86SERVO T600 is an electric motor that can precisely control angle, speed, and position based on control signals.

    • DMP Vortex86EX2 533MHz+300MHz 32-bit x86
    • Position Sensor: Absolute optical encoder 22bits PPR
    • Communication: RS485 x 2 ports, 6Mbps
    • Gear Box Backlash: <2 arcmin (0.033°)
    • Command Protocol: EtherCAT / Modbus RTU (optional)
    • Dimension: 76(W) x 76(H) x 112(L)mm
    • Rotational Range: 0°~ 360°, endless turn
  • 86SERVO_T120 - 1

    86SERVO T120

     Servo Motor US$ 600.00

    86SERVO T120 is a high-performance intelligent servo motor composed of a controller, sensor, gearbox, servo motor, and controller.

    • DMP Vortex86EX2 533MHz+300MHz 32-bit x86
    • Position Sensor: Contactless absolute encoder (16,384PPR) Optical encoder (904,396PPR)
    • Communication: RS485 x 2 ports, 6Mbps
    • Gear Box Backlash: <2 arcmin (0.033°)
    • Command Protocol: Modbus RTU / EtherCAT(optional)
    • Dimension: 44(W) x 44(H) x 60(L)mm
    • Rotational Range: 0°~ 360°, endless turn
  • 86Duino EduCake

    86Duino EduCake

     86Duino Board US$ 115.00
    • Processor: Vortex86EX
    • Clock Speed: 300 MHz
    • Memory: 128MB DDR3
    • Flash Memory: 8MB
    • Digital I/O Pins: 45 (of which 11 provide 32bit PWM output)
    • Analog Input Pins: 7 (11bit)
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • DC Current per I/O Pin: 16 mA
    • DC Current for 3.3V Pin: 400 mA
  • RJ45cable_1

    RJ-45 Cable (for EtherCAT use)

     Connector
    • Using for EtherCAT
    • RJ-45 15cm x 5 pieces per pack
    • RJ-45 30cm x 5 pieces per pack
    • RJ-45 100cm x 2 pieces per pack
  • Terminalwire1

    Eurostyle Terminal Cable (20 pieces per pack)

     Connector
    • Double-Sided Eurostyle Terminal Cable
    • UL 1007-20AWG, Cable Length: 30 cm / 40 cm
    • 20 pieces per pack
  • 86STEP_57

    86STEP-577609

     Stepper Motor US$ 80.00
    • Stall Detection, Position Verification, Accurate Homing, and Close-loop control with step motor benefit
    • Holding torque: 1800mN.m
    • Step angle: 0.9°
    • Detent torque: 70mN.m
    • Rated Current: 3.0A
    • Weight: 1.0kg
  • 86STEP-426009

    86STEP-426009

     Stepper Motor US$ 62.00
    • Stall Detection, Position Verification, Accurate Homing, and Close-loop control with step motor benefit
    • Holding torque: 860mN.m
    • Step angle: 0.9°
    • Detent torque: 20mN.m
    • Rated Current: 1.50A
    • Weight: 0.45kg
Carrito de compra

Comienza a escribir y presiona enter para buscar

Scroll al inicio